Categories

System malfunctions and false alarms can be aggravating, and more importantly, may prevent your home’s security from doing its job effectively. Luckily, most problems, from false alarms to dead batteries, are simple to fix. Check out our tips for troubleshooting your home alarm system in Savannah. We’ll help you keep your household safeguarded and your system operating the way it should.

Test Your Home Security System In Savannah

One of the most sensible ways to troubleshoot your home’s security is to test it yourself! The latest systems permit you to place them in test mode to prevent you from initiating an emergency call. Once you’re in test mode, do the following:

• Turn on your system as you normally would when going out.
• Open a door or window that uses a contact sensor, or try to set off something else. Shut the door or window once you’re finished so it doesn’t trigger the alarm as you leave test mode.
• Allow the alarm to resonate for 60 seconds to make sure a message is sent to the security provider and an entry is created in the alarm system log.
• Proceed to test sensors as you wish
• Review the alarm’s activity log to confirm functionality.

Rest assured, monitoring agents will know that your alarm system is undergoing a test. Just make sure to switch out of test mode when done. It’s smart to test monthly or whenever you change your home’s phone or internet connectivity.

Check The Placement And State Of Motion Detectors

Although an integral part of your alarm system, motion detectors are notorious for false alarms. Do your part to prevent them with some simple troubleshooting.

• Perform a physical check. Are there things that could move within the path of the sensor, like drapery blown in a breeze?
• Is the sensor covered in dust? Dirt, cobwebs, and debris can cause issues. Check to confirm the face is clean.
• Does the motion detector have pet immunity you can activate? Some models can be programmed to disregard pets weighing as much as 100 pounds.
• When was the battery last replaced? A low battery can affect performance or lead to false alarms.
• Is a heat source impacting the sensor? Excessive heat from a fireplace, direct sun, or something else can set off an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One helpful perk of new home security systems is that they’ll alert you when batteries are running low. If your system has a control panel or mobile app, you’ll typically find notifications there. Depending on the alarm, you might hear an intermittent beep when batteries are running out. 

Contact sensors, motion detectors, smoke detectors, and other wireless devices have batteries that should be replaced every 1 to 2 years. It’s best to keep batteries on hand and set a replacement schedule. Top systems also come with a backup battery for the primary control panel. This backup helps keep your system running if you lose power and should charge back up once power is back online. If it doesn’t, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Savannah 

As the foremost name in home security, ADT creates systems that provide unsurpassed protection and functionality. Switching to test mode is easy through the ADT+ app or MyADT.com, and you’ll always get notifications when a sensor battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Savannah home and family. Place a call to (912) 226-4483 or fill out our form today!