Where To Place Carbon Monoxide Detectors In Your Savannah House
Property owners must protect against numerous risks like fire, burglary, and flooding. But what about something that can’t be detected by human senses? Carbon monoxide is different from other dangers as you may never realize it’s there. Nevertheless, installing CO detectors can effectively shield your family and property. Explore more about this hazardous gas and where to place carbon monoxide detectors in your Savannah property.
What Is Carbon Monoxide?
Referred to as the silent killer because of its absence of odor, taste, or color, carbon monoxide is a commonly found gas caused by an incomplete combustion of fuels. Any fuel-utilizing appliance like an oven or fireplace can produce carbon monoxide. While you typically won’t have any trouble, issues can present when appliances are not frequently maintained or adequately vented. These mistakes could lead to a build-up of the potentially lethal gas in your home. Heating appliances and generators are the most common causes for CO poisoning.
When in contact with low amounts of CO, you might notice dizziness, headaches, fatigue nausea, or vomiting. Prolonged exposure to higher amounts could result in cardiorespiratory failure, and potentially death.
Tips On Where To Place Savannah Carbon Monoxide Detectors
If you don’t use at least one carbon monoxide detector in your home, buy one now. Ideally, you should install one on every level of your home, and that includes basements. Browse these suggestions on where to place carbon monoxide detectors in Savannah:
- Install them on every floor, especially in places where you use fuel-burning appliances, such as water heaters, furnaces, gas dryers, and fireplaces.
- Always install one within 10 feet of bedrooms. If you only install one carbon monoxide detector, this is where to put it.
- Position them about 10 to 20 feet away from sources of CO.
- Avoid installing them right next to or above fuel-consuming appliances, as a bit of carbon monoxide might be discharged when they start and set off a false alarm.
- Fasten them to walls at least five feet from the floor so they will measure air where occupants are breathing it.
- Avoid installing them in dead-air areas and beside windows or doors.
- Install one in spaces above attached garages.
Inspect your CO detectors often and maintain them according to manufacturer guidelines. You will generally need to replace them in six years or less. You should also make certain any fuel-burning appliances are in in good working shape and have proper ventilation.